TM 1-4920-434-13&P
FIELD MAINTENANCE
MACHINE AND WELDING SHOP
MAINTENANCE INSTRUCTIONS FOR CYLINDER BRACKET ASSEMBLY AND HARDWARE
INITIAL SETUP:
Personnel Required
Tools and Special Tools
General Mechanics Tool Kit
CMF 15 Series (1)
(WP 0073 00, Table 2, Item 104 )
CMF 44-B Metal Worker (1)
Paint Brush (WP 0073 00, Table 2, Item 107 )
References
Torque Wrench, 0-600 in. lbs
TM 1-1500-204-23
(WP 0073 00, Table 2, Item 110 )
Materials/Parts
Equipment Condition
Enamel, White (WP 0079 00, Item 3)
Cylinder Kit Removed
Primer, Coating (WP 0079 00, Item 6)
NOTE
During installation of components same hardware should be used so as to maintain original
integrity of shop set.
INSPECTION OF INSTALLED ITEMS
Figure 1.
Cylinder Bracket Assembly.
1.
Inspect cylinder bracket assembly (Figure 1) for damage. Replace as necessary.
2.
Inspect cylinder bracket hardware (Figure 1, Item 2, 3,5, 6, 7, and 9) for rust, cracks and rounded heads.
Replace as necessary.
REMOVAL
1.
Remove two bolts (Figure 1, Item 1), two lock washers (Figure 1, Item 2), and two lat washers (Figure 1, Item
3) detaching cylinder bracket assembly (Figure 1, Item 8) from wall.
2.
Remove two bolts (Figure 1, Item 5), two lock washers (Figure 1, Item 6), four lat washers Figure 1, Item 7),
and two nuts (Figure 1, Item 9) detaching cylinder bracket assembly (Figure 1, Item 8) from cylinder bracket
(Figure 1, Item 4).
0048 00-1