TM 1-4920-434-13&P
FIELD MAINTENANCE
MACHINE AND WELDING SHOP
MAINTENANCE INSTRUCTIONS FOR BENCH GRINDER AND HARDWARE
INITIAL SETUP:
Personnel Required
Tools and Special Tools
General Mechanics Tool Kit
CMF 15 Series (2)
(WP 0073 00, Table 2, Item 104 )
Equipment Condition
Functional
INSPECTION OF INSTALLED ITEMS
NOTE
During installation of components same hardware should be used so as to maintain original
integrity of shop set.
Figure 1.
Bench Grinder.
1.
Inspect bench grinder (Figure 1) for damage. Replace as necessary.
2.
Inspect bench grinder hardware (Figure 1, Item 2 through 6) for rust, cracks and rounded heads. Replace as
necessary.
REMOVAL
Remove two bolts (Figure 1, Item 2), two lock washers (Figure 1, Item 3), two upper lat washers (Figure 1, Item
4), two lower lat washers (Figure 1, Item 5) and two nuts (Figure 1, Item 6).
0046 00-1
