f.
Installation. Install the wire harness
assembly in reverse order of removal procedure. After
and check individual wires for continuity.
installing connectors. Safety wire in accordance with
MS33540 using lockwire MS20995C20.
e. Repair, Replacement and Reassembly.
5-9.
Air Conditioning System
'Wire Harness
Assembly (13217E4145)
(1) Solder connections will be made in
accordance with MIL-S-6872 using solder type
a. Removal.
Refer to figure 5-8;
tag and
SN60OWRP2 per Fed Spec QQ-S-571.
disconnect the air conditioning system wire harness
(2) Replace defective wires with wire in
assembly as follows: (1) Remove the terminal board
accordance with MIL-W-5086, Type II. Wire size and
cover from terminal board (TB91. Remove three nuts,
approximate length in inches is provided in figure 5-7.
screws, and washers and remove the terminal board.
(3) If self-clinching cable straps are removed
to facilitate repairs, install new cable straps at three inch
intervals and at all cable breakouts.
5-10