5-9. Welding Machine
5-11. Welding Gun
Refer to TM 5-3431-221-15 for maintenance
Refer to paragraph 6-4 of this manual for main-
instructions to be used at direct support level on the
tenance instructions to be used at direct support
welding machine.
level on the welding gun.
5-10. Trailer Chassis
5-12. Control Monitor
Refer to TM 9-2330-202-14P for maintenance
Refer to paragraph 6-5 of this manual for main-
instructions to be used at direct support level on the
tenance instructions to be used at direct support
trailer chassis.
level on the control monitor.
Section IV. REMOVAL AND INSTALLATION OF MAJOR COMPENENTS
5-13. Welding Machine
1000 pounds and raise the welding machine (11)
off the trailer body.
WARNING
b. Installation. Lower the welding machine (11)
Do not attempt to raise the welding
onto the trailer body and align it with the mounting
machine off the trailer using a lifting
holes. Secure the welding machine using the four
device with a lifting capacity of less
bolts (8), lockwashers (9) and flatwashers (10).
than 1000 pounds. Do not allow the
welding m a c h i n e t o s w i n g w h i l e
5-14. Trailer Body
suspended. D o not stand under the
a. Removal.
welding machine
while
suspended.
(1) Remove the tool boxes (para 4-15).
Failure to observe this warning can
(2) Release the load binders (32 and 41, fig.
result in serious injury or death to
personnel.
bottle (45), and argon bottle (46). Remove the vise
(47).
lockwashers (9) and flatwashers (10). Attach a
(3) Remove the welding machine (para 5-13).
lifting device with a lifting capacity of not less than
