D I R E C T SUPPORT MAINTENANCE INSTRUCTIONS
REPAIR PARTS, SPECIAL TOOLS AND EQUIPMENT
Section I.
5-3. Special Designed (Fabricated) Tools
and Equipment
No special tools or equipment are needed for the
welding shop.
No specially designed tools and equipment are
needed by maintenance personnel.
Direct
Support
Maintenance
Repair
Parts
Direct support maintenance repair parts are listed
and illustrated in Appendix C of this manual.
Section II.
TROUBLESHOOTING
may occur , n o r a l l t e s t s o r i n s p e c t i o n s a n d
5-4. General
corrective actions. If a malfunction is not listed or is
a. This section contains troubleshooting in-
not corrected by listed corrective actions, notify
form at ion for locating and correcting most of the
your supervisor.
o p e r a t i n g troubles which may develop in the
c. Refer
to
TM
5-3431-221-15
for
welding shop. Each malfunction for an individual
troubleshooting that concerns the welding machine.
component, unit, or system is followed by a list of
TM 9-2330-202-14P for
d. R e f e r t o
tests on inspections which will help you to deter-
troubleshooting that concerns the trailer chassis.
mine probable causes and corrective actions to
take. You should perform the tests / inspections
NOTE
and corrective actions in the order listed. Refer to
Before you use this table, be sure you have
performed all applicable operating checks.
b. This manual cannot list all malfunctions that
Section Ill. GENERAL MAINTENANCE
5-5. General
5-7. Description
This section contains maintenance instructions for
For a complete description of the welding shop,
maintenance to be performed at direct support level
refer to paragraph 1-7.
as allocated by the Maintenance Allocation Chart.
5-8. Tabulated Data
Refer to appendix B.
5-6. Forms and Records
Refer to paragraph 1-2.
diagram.
