(3) Refer to figure 6-10 and remove pilot rectifier
CR3.
a. Removal.
b. Installtion.
(1) Remove the top and housing from the weld-
(1) Refer to figure 6-10 and install pilot rectifier
ing machine (para 3-20).
CR3.
(2) Refer to figure 6-9 and mount the relay as-
(2) Refer to figure 6-9 and remove the two screws
sembly.
and nuts that mount the relay assembly on the front
(3) Install the top and housing (para 3-20).
control panel.
b. Installation.
(1) Refer to figure 6-11 and install the power
a. Remova1.
factor capacitor.
( 1 ) Remove the top and housing from the welding
machine (para 3-20).
(2) Install the top and housing on the welding
(2) Refer to figure 6-11 and remote the power
machine (para 3-20).
f a c t o r capacitor.
