(3) Refer to figure 6-8 and remove the tesla
coil.
a. Removal.
b. Installation.
(1) Disconnect ac power from the welding ma-
(1) Refer to figure 6-8 and install the tesla coil.
chine.
(2) Install the top and housing (para 3-20).
(2) Remove the top and housing (para 3-20).
a. Removal.
(1) Disconnect ac power from the welding ma-
chine.
(2) Remove timer and high frequency drawer
(3) Remove top and housing from the welding
machine (para 3-20).
(4) Remove the power rectifier assembly (para
(5) Refer to figure 6-5 and remove the filter re-
actor or filter reactor coil.
b. Testing. Connect an ohmmeter across the re-
actor coil and check for an open circuit, indicating a
defective coil.
c. Installation.
(1) Refer to figure 6-5 and install the coil on the
core or install the filter reactor on main transformer
T1.
(2) Install the power rectifier assembly (para
