c. Installation.
(2) Refer to figure 4-14 and remove the
stabilizer.
(1) Refer to figure 4-14 and install the
stabilizer.
leads and set the meter on ohms. If the indicator
(2) Install the top and side of the welding
gives no reading, the coil has an open circuit and
machine (para 3-26).
must be replaced.
Section IX. WIRING ASSEMBLY
4-35. Wiring
4-34. General
The welding machine has no wiring' harness
a. Removal.
which is replaced as a complete unit. The wiring
(1) Remove the top and sides of the weld-
is made up of individual wires connected point
ing machine (para 3-26).
to point and taped together to form tables.
