TM 5-3431-225-15
3-42).
(para
Section V. CONTROL PANEL
(11) Install the standard-remote switches
4-16. Control Panel
a. Removal.
(12) Install the power switch (para 3-29).
(1) Remove the welder top and sides (para
3-26 ) .
(13) Install the top and sides on the welding
(2) Remove the power switch (para 3-29).
machine (para 3-26).
(3) Remove the standard-remote switch
(4) Remove the high frequeney switch
(5) Remove the manual-auto switch (para
(6) Remove the fuse receptacle (para 3-34).
(7) Remove the start adjustment rheostat
( 8 ) Remove the control rheostat (para
(9) Remove the range and polarity switch
assembly (para 4-17).
(10) Remove the front door assembly (para
3-27) .
(11) Remove the TIG-metallic switch (para
(12) Remove the ground-electrode terminals
(13) Refer to figure 4-1 and remove the con-
trol panel.
b. Installation.
(1) Refer to figure 4-1 and install the con-
trol panel.
(2) Install the ground-electrode terminals
(3) Install the TIG-metallic switch (para
(4) Install the front door assembly (para
(5) Install the range and polarity switch
(6) Install the control rheostat (para 4-18).
(7) Install the start adjustment rheostat
(8) Install the fuse receptacle (para 3-34).
(9) Install the manual-auto switch (para
3-32 ) .
(10) Install the high frequency switch ( para
