OPERATOR AND ORGANIZATIONAL MAINTENANCE INSTRUCTIONS
Section I. OPERATOR'S AND ORGANIZATIONAL MAINTENANCE REPAIR
PARTS, TOOLS, AND EQUIPMENT
sonnel for the maintenance of this welding ma-
chine.
a. Tools and repair parts issued with or author-
ized for the welding machine are listed in the
3-2. Organizational Maintenance Repair Parts
Organizational maintenance repair parts are
b. No special tools or equipment are required by
manual,
the operator or organizational maintenance per-
LUBRICATION
Section II.
3-3. General Lubrication Information
No lubrication is required for maintenance of this welding machine.
Section Ill. PREVENTIVE MAINTENANCE CHECKS AND SERVICES
3-5. Daily Preventive Maintenance Checks
and
Services
To insure that the welding machine is ready for
Refer to table 31 for the daily preventive
operation at all times, it must be inspected system-
maintenance checks and services which must be
atically, so that defects may be discovered and cor-
rected before they result in serious damage or
performed by the operator. The item numbers are
failure. The necessary preventive maintenance
listed consecutively and indicate the sequence of
checks and services to be performed are listed and
minimum requirements,
numbers indicate the sequence of minimum in-
3-6. Quarterly Preventive Maintenance Checks
spection requirements. Defects discovered during
and Services
operation of the unit shall be noted for future cor-
rection, to be made as soon as operation has
a. Refer to
table 3-1 for the
quarterly preven-
ceased. Stop operation immediately if a deficiency
tive maintenance services which must be per-
is noticed during operation which would damage
formed by organizational personnel. The item
the equipment if operation were continued. All de-
numbers are listed consecutively and indicate the
ficiencies and shortcomings will be recorded to-
sequence of minimum requirements.
gether with the corrective action taken on DA
b. A quarterly interval is equal to 3 calendar
Form 2404 (Equipment Inspection and Mainte-
months, or 250 hours of operation, whichever
nance Worksheet) at the earliest possible oppor-
occurs first.
tunity.