installation.
Section XVII.
ARC WELDER
3-61. General
The arc welder is comprised mainly of the
generator assembly, brushholder assembly,
and their associated components.
3-62. Welding Generator
a. Inspection.
(1) Inspect welder for any evidence of
damage.
inch.
a solvent-dampened cloth.
c. Repair.
Figure 3-35. Brushholder removal and installation.
(1) Replace brushes (para 3-63).
(1) Remove panel (para 3-21).
(2) Replace end covers (para 3-64).
(2) Remove and install end cover as illus-
trated in figure 3-36.
3-63. Brushholder
a. Removal and Installation. Remove and
b. Cleaning and Inspection.
install brushholder as illustrated in figure 3-
(1) Clean and cover with a solvent damp-
35.
ened cloth. Dry thoroughly.
b. Cleaning and Inspection.
(2) Inspect cover for cracks, breaks or
(1) Wipe brushholder with a clean lint-
other damage.
free cloth. Blow off with compressed air.
(3) Replace damaged cover.
(2) Inspect brushes for wear less than
3-65. Remote Box
(3) Inspect spring tension for 32 ounces.
a. Removal. Remove remote box from mount
(4) Replace components which do not
by unlatching catch.
pass inspection.
b. Cleaning and Inspection.
(1) Clean remote box with a solvent
3-64. Generator End Cover
dampened cloth.
a. Removal and Installation.
