a. Removal and Installation. Remove and in-
stall idler regulator as illustrated in figure
3-11.
b. Cleaning and Inspection.
(1) Clean all parts with an approved
solvent.
(2) Inspect for cracks, breaks, or other
damage. Replace a damaged regulator.
3-26. Fuel Pump
a. Removal and Installation. Remove and in-
stall fuel pump as shown in figure 3-12.
b. Cleaning and Inspection.
(1) Clean all parts with an approved sol-
vent. Dry thoroughly.
( 2 ) Inspect all parts for cracks, breaks,
or other damage. Replace defective fuel pump.
3-27. Air Cleaner
a. Removal. Remove air cleaner as shown
in figure 3-13.
b. Cleaning and Inspection.
(1) Clean all parts with an approved sol-
vent. Dry thoroughly.
(2) Inspect all parts for cracks, breaks,
or other damage. Replace a damaged air
cleaner.
c. Installation. Install air cleaner as shown
