TM 1-4920-434-13&P
FIELD MAINTENANCE
MACHINE AND WELDING SHOP SHOP
MAINTENANCE INSTRUCTIONS FOR FIRE EXTINGUISHER BRACKETS AND HARDWARE
INITIAL SETUP:
Personnel Required
Tools and Special Tools
CMF 15 Series (1)
General Mechanics Tool Kit
(WP 0073 00, Table 2, Item 104 )
Equipment Condition
Torque Wrench, 0-600 in. lbs
Fire Extinguisher Removed
(WP 0073 00, Table 2, Item 110 )
INSPECTION OF INSTALLED ITEMS
NOTE
During installation of components same hardware should be used so as to maintain original
integrity of shop set.
Figure 1.
Inspect Fire Extinguisher Bracket.
1.
Inspect ire extinguisher bracket (Figure 1, Item 1) for damage. Replace as necessary.
2.
Inspect ire extinguisher bracket hardware (Figure 1, Item 2 through 4) for rust, cracks, and rounded heads.
Replace as necessary.
REMOVAL
Remove two bolts (Figure 1, Item 4), two lock washers (Figure 1, Item 3), and two lat washers (Figure 1, Item
2).
0064 00-1