0065 00
TM 1-4920-434-13&P
WARNING
Ensure compressed air supply is disconnected before attempting any work on oil/water sep-
arator. Do not direct compressed air near eyes or directly against skin. Wear goggles; high
pressure air against eyes can cause BLINDNESS.
NOTE
During installation of components same hardware should be used so as to maintain the original
integrity of the shop sets.
INSPECTION OF INSTALLED ITEMS
NON-METALLIC HOSE AND FITTINGS
Figure 1.
Inspect Hose and Fittings.
1.
Inspect non-metallic hose (Figure 1, Item 1) for visible damage.
2.
Replace if damaged is detected.
0065 00-2