TM 1-4920-434-13&P
0042 00
REMOVAL CONTINUED
SIX DRAWER CABINET (A) AND SIX DRAWER CABINET (B) CONTINUED
3. Remove hardware attaching six drawer cabinet (A) (Figure 3, Item 7) and six drawer cabinet (B) (Figure 3,
Item 6) to shelter loor and wall IAW WP 0043 00, Cabinets (A) and (B) Hardware, REMOVAL.
4.
Remove four lag bolts (Figure 3, Item 4), four lock washers (Figure 3, Item 3), and four lat washers (Figure
3, Item 2) detaching work surface (Figure 3, Item 16) from six drawer cabinet (A) (Figure 3, Item 7) and six
drawer cabinet (B) (Figure 3, Item 6).
5.
Remove work surface (Figure 3, Item 16) from top of six drawer cabinet (A) (Figure 3, Item 7) and six drawer
cabinet (B) (Figure 3, Item 6).
6.
Remove four bolts (Figure 3, Item 17), eight lat washers (Figure 3, Item 18), four lock washers (Figure 3,
Item 3), and four nuts (Figure 3, Item 20) detaching two cabinet brackets (Figure 3, Item 19) from six drawer
cabinet (A) (Figure 3, Item 7) and six drawer cabinet (B) (Figure 3, Item 6).
7.
Remove four bolts (Figure 3, Item 17), four lock washers (Figure 3, Item 3), eight lat washers (Figure 3,
Item 2), and four nuts (Figure 3, Item 20) detaching six drawer cabinet (A) (Figure 3, Item 7) from six drawer
cabinet (B) (Figure 3, Item 6).
REPAIR OR REPLACEMENT
SIX DRAWER CABINET (A) AND SIX DRAWER CABINET (B)
1.
If cabinet brackets (Figure 3, Item 19) can be repaired by welding, weld damaged area IAW TM
1-1500-204-23. Repair must not interfere with form, it, or function of cabinet brackets (Figure 3, Item 19).
2.
Paint repaired cabinet brackets (Figure 3, Item 19) IAW WP 0069 00, Figure 6.
INSTALLATION
SIX DRAWER CABINET (A) AND SIX DRAWER CABINET (B)
1.
Install four bolts (Figure 3, Item 17), eight lat washers (Figure 3, Item 2), four lock washers (Figure 3, Item
3), and four nuts (Figure 3, Item 20) securing six drawer cabinet (A) (Figure 3, Item 7) and six drawer cabinet
(B) (Figure 3, Item 6) together.
2.
Install four bolts (Figure 3, Item 17), eight lat washers (Figure 3, Item 18), four lock washers (Figure 3, Item
3), and four nuts (Figure 3, Item 20) securing two cabinet brackets (Figure 3, Item 19) to six drawer cabinet
(A) (Figure 3, Item 7) and six drawer cabinet (B) (Figure 3, Item 6).
3.
If a new work surface (Figure 3, Item 16) must be installed:
a.
Position work surface (Figure 3, Item 16), inished side up, on top of six drawer cabinet (A) (Figure 3,
Item 7) and six drawer cabinet (B) (Figure 3, Item 6).
b.
Ensure work surface (Figure 3, Item 16) is lush with back and sides of six drawer cabinet (A) (Figure 3,
Item 7) and six drawer cabinet (B) (Figure 3, Item 6).
c.
On inside of six drawer cabinet (A) (Figure 3, Item 7), mark two hole placements (Figure 3, Item 1) in top
of cabinet on non-inished side of work surface (Figure 3, Item 16).
d.
On inside of six drawer cabinet (B) (Figure 3, Item 6), mark two hole placements (Figure 3, Item 5) in top
of cabinet on non-inished side of work surface (Figure 3, Item 16).
e.
After four hole placement marks have been made, lip work surface (Figure 3, Item 16) over with non-
inished side up.
f.
On non-inished side of work surface (Figure 3, Item 16) at four marked hole placements (Figure 3, Item
1 and 5) center punch and drill four 5/16 inch holes to a depth of 3/4 inch holes to a depth of 3/4 inch.
g.
Return work surface (Figure 3, Item 16) inished side up, on top of six drawer cabinet (A) (Figure 3, Item
7) and six drawer cabinet (B) (Figure 3, Item 6).
4.
Align bolt holes of work surface (Figure 3, Item 16) with bolt holes (Figure 3, Item 1 and 5) on top of six drawer
cabinet (A) (Figure 3, Item 7) and six drawer cabinet (B) (Figure 3, Item 6).
0042 00-5