and 9) from the capacitor mounting brackets (15). Push
(2) Remove nuts (1), washers (2) and screws
insulated sleeving (10) back far enough to disconnect
(31 that attach wire harness connector. Carefully pull
wire harness leads from the capacitors.
disconnected wire harness (4) through grommets (28)
and remove the harness.
(4) Remove nuts (11), washers (12 and 13)
(3) Remove the leads of the 400 Hz auxiliary
and screws (14) to remove capacitor mounting brackets
(15), wire harnesses (16 and 17) and gaskets (18).
wire harnesses (16 and 17) from relays K43A and K43B.
Remove nuts (5), three washers (6), and screw (7) to
remove each of the six capacitors (8
5-44