TM 5-3431-225-15
Figure 4-6. Rectifier assembly, removal and installation.
c. Installation.
b. Installation.
(1) Refer to figure 4-7 and install the con-
trol rectifiers.
capacitors.
(2) Install the top and sides on the weld-
(2) Install the top and sides on the weld-
(1) Remove the top and sides from the
a. Removal.
(1) Remove the top and sides from the
capacitors.
b. Testing. Connect a suitable capacitor tester
to the wire leads and check the Capacitors for
(2) Refer to figure 4-9 and remove the re-
open or short circuit.
sistors.