Section V. REMOTE OUTPUT CONTROL RHEOSTAT ASSEMBLY AND
FOOT SWITCH ASSEMBLY
620. General
Cable Assembly, Model DAR300HFSG
The remote output control rheostat controls
welding current within the selected range when
the panel control remote control switch is in re-
semble the remote output control rheostat and
mote control position. The foot switch controls ac-
cable assembly.
tivation of the contractor for inert gas welding.
b. Cleaning and Inspection.
An on-off foot switch and a separate remote out-
put control rheostat are furnished with Model
(1) Clean all metallic parts with an approved
DAR300HFSG. A combination foot on-off switch
cleaning solvent and dry thoroughly. Clean the re-
and remote output control is furnished with Model
mote output control rheostat with a clean dry
2100H2007.
cloth.
10 Washer, lock, No. 10 (1 rqr)
Screw, self-tapping, thread forming, No. 6 x 3/8 in. (2 rqr)
1
Adapter
11
Plate, identification
2
Cable assembly
12
3
Washer, flat, No. 10 (11 rqr)
Screw, machine, No. 1032 x 5/8 in. (1 rqr)
4
13
Screw, self-tapping, thread forming, No. 10 x 5/8 in. (10 rqr)
Connector
5
14
Shroud
Plate, instruction
15
6
Nut, sheet spring, No. 10 (10 rqr)
Washer, lock, 1/4 in. (2 rqr)
16
7
Rheostat
Screw, machine, 1/4-20 x 5/8 in. (1 rqr)
17
8
Housing
Knob
9
Nut, plain, hexagon, No. 6-32 (1 rqr)
18
reassembly, Model DAR-300HFSG.
