c. Installation.
b. Cleaning and Inspection.
(1) Refer to figure 3-9 and install the termi-
(1) Clean all metal parts with an approved
nal connecting links.
cleaning solvent and dry thoroughly. Clean the
(2) Install the bottom rear shroud (para
fiber board with a clean dry cloth.
3-13).
(2) Inspeet for cracks, breaks, corrosion, or
other damage.
325. Ground and Electrode Terminal Board
(3) Replace a defective part as necessary,
a. Removal.
c. Installation.
(1) Remove the right side shroud (para
(1) Refer to figures 3-4 and 3-5 and install
the ground and electrode terminal board.
(2) Refer to figures 3-4 and 3-5 and remove
the ground and electrode terminal board.
(2) Install the right side shroud (para 3-13).
