b. Cleaning and Inspection.
(2) Refer to figure 35 and remove the push-
(1) Clean all parts with a clean, dry, lint-free
button switch.
cloth.
b. Cleaning and Inspection.
(2) Inspect for breaks, cracks, burned or bro-
(1) Clean the switch with a clean, dry cloth.
ken contacts, damaged or corroded terminals, and
(2) Inspect for breaks, cracks, corrosion, de-
other damage,
fective contacts, and other damage.
(3) Replace a defective pushbutton switch as
(3) Replace a defective contactor as neces-
necessary.
sary.
c. Installation.
c. Installation
(1) Refer to figure 35 and install the push-
(1) Refer to figure 36 and install the con-
button switch.
tactor.
(2) Install the right side shroud (para 3-13).
(2) Install the right side shroud (para 3-13).
3-20. Contactor
a. Removal.
300HFSG
(1) Remove the right side shroud (para
a. Removal.
3-13).
( 1 ) Remove the right side shroud (para
(2) Refer to figure 36 and remove the con-
313).
tactor.
