clean, lint-free cloth. Clean commutator with
washers; spacer, and frame, drive assembly,
No. 00 sandpaper and finish cleaning with
housing and frame in solvent and dry thor-
vacuum line.
oughly. Wipe off solenoid case and plunger
with solvent-dampened cloth and dry with
Figure 6-3. Battery charging generator, assembly and disassembly.
spring for general condition. Inspect studs
brush
brushes,
Inspect
d. Inspection.
for burned or otherwise damaged threads. In-
holders, coil assemblies and armature in sim-
spect contact disc for pitted or burned spots.
ilar manner to that outlined for similar parts
e. Repair. Replace any parts which do not
pass inspection. If drive gear must be replaced,
3. Inspect bearing surfaces of bushings for
camshaft will probably need replacement also.
wear and scoring. Inspect drive assembly gears
f. Reassembly.
To reassemble
for wear and chipped or broken teeth and
84