TM 1-4920-455-13&P
3-14. Fixtures - Water Feed Thru Connector - Inspect
3-14
This tasks covers: Inspection of connector
INITIAL SETUP
44B Welder
Personnel Required:
INSPECT WATER FEED THRU CONNECTOR
1.
2.
Remove dust caps (1), faucet (2) or adapter (3) from
connector (4).
Inspect condition of connector threads (5). Inspect
connector weld (6) for cracks or breaks. Replace
IAW Task 3-15, if defective.
3. Install faucet (2) and adapter (3) as necessary.
4. Ensure dust caps (1) are installed when connector
(4) is not in use.
END OF TASK
3-16
