35.
Jackscrew
36.
Engine and skid assembly
37.
34 inch pipes
38.
Platform
Figure 2-5. Removal of engine and skid assembly (sheet 3 of 3)
(2) Remove screws (3) and washers (4)
screws 16) and washers (7) and remove the fuel and oil
and remove the engine combustor access panel (5).
components access panel (8).
Note.
Tag or otherwise identify harness connectors
(4) Open battery access and storage
as removed to aid at installation.
compartment door (9).
(3) Disconnect wiring harness connectors
(5) Loosen clamps (10, fig. 2-5, sheet 2 of
P 12, P13, and P14 from instrument panel. Remove
3), remove generator cooling air discharge hose (11)
and clamps (10).
2-24
