spin the blower fan (4) to make sure the fan
(1) Secure the motor (7) to the blower
does not scrape the housing.
housing (6) using screws (5) and spacers (8).
(3) Secure blower cover (3) to housing
(2) Secure blower fan (4) to motor shaft
(6) with screws (1) and nuts (2).
with setscrew. Adjust the blower fan so that
f. Installation. Install blower assembly in
the hub is flush with the end of the motor
accordance with paragraph 3-43.
shaft. Hold the blower cover (3) in place and
132
