TM 1-4920-455-13&P
3-20. Special Circuit Breaker for Electric Welder - Replace (Cont’d)
3-20
d. Move wires (3) and (4) aside, grasp breaker (2) firmly
and pull from panel box (5).
2. Installing new breaker.
a. Plug new circuit breaker(2) into box (5). Push
firmly.
b. Install black (3) and red (4) wires at bottom of circuit
breaker (2) and securely tighten screws (1).
C. Replace cover (6) on panel box (5) with six screws (7).
Leave breaker in OFF position.
GO TO NEXT PAGE
3-27
