0027 00
TM 1-4920-434-13&P
POSITIONING FOUR DRAWER CABINET (E) FOR TRANSPORT MODE - CONTINUED
CAUTION
Torque values are provided and must be respected to prevent possible damage to equip-
ment or shelter. Improper procedures could result in extensive damage to government
property.
Do not use installed equipment as lifting points to relocate cabinet.
1.
Remove four setscrews from four drawer cabinet (E) (Figure 1, Item 1) transport location loor inserts and
store in cotton mailing bag located in shelter BII box.
2.
Remove four bolts (Figure 1, Item 2), four lock washers (Figure 1, Item 3), and four lat washers (Figure 1,
Item 4) from storage location.
3.
Position four drawer cabinet (E) (Figure 1, Item 1) at transport location.
4.
Align two cabinet brackets (Figure 1, Item 5) with loor inserts at cabinet (E) transport location.
5.
Inspect four bolts (Figure 1, Item 2) for thread damage or rounded heads.
6.
Replace bolts (Figure 1, Item 2) if damage is detected.
7.
Install four bolts (Figure 1, Item 2), four lock washers (Figure 1, Item 3), and four lat washers (Figure 1, Item
4) securing two brackets (Figure 1, Item 5) to shelter loor.
Torque bolts 160-190 in. lbs.
8.
END OF WORK PACKAGE
0027 00-2