CHAPTER 10
REPAIR OF ACCESSORY COMPONENTS
Section I. GENERAL INFORMATION
6115-586-12. A list of the accessory components and
10-1. General Information
an illustration of each is also included in TM 5-6115-
This chapter contains repair instructions for the
586-12; therefore, illustrations are provided in this
accessory components used with the power plant. No
chapter only when required as an aid to repair of
removal or installation instructions are given as these
specific components.
items are normally installed during setting up of the
power plant and removed for movement to a new
worksite according to instructions provided in TM 5-
Section II. COMPRESSED AIR AND VACUUM SYSTEM ACCESSORY COMPONENTS
10-2. Inflation and Deflation Ejector Assembly
a. General. The inflation and deflation ejector
b.
Disassembly.
Refer to figure 10-1 and
disassemble the inflation and deflation ejector assembly
assembly is used in conjunction with the compressed air
as follows.
hose assembly to apply inflation air from the power plant
(1) Remove nut (1) , ejector assembly support
compressed air outlet for the MUST hospital inflatable
(2), flat washer (3) and bolt (4) from the ejector
elements. Its main components are an ejector tube, a
tube (14).
quick disconnect coupling half, and a support.
10-1