TM 5-3431-225-15
Section IV. OPERATOR'S MAINTENANCE
to the stop each day to prevent corrosion and
3-7. General
keep contacts clean.
The instructions in this section are published for
the information and guidance of personnel re-
3-9. Cartridge Fuses
sponsible for the operator's maintenance of the
welding machine and are in addition to those
Refer to figure 3-3 and remove and install the
listed in paragraph 3-5.
cartridge fuses.
3-8. Controls
3-10. Plug Fuse
Turn the welding machine OFF, Rotate the con-
Refer to figure 3-3 and remove and install the
trols clockwise to the stop, then counterclockwise
plug fuse.
