TM 1-4920-455-13&P
d. Disconnecting Shelter Power Cables.
1. Disconnect male end of shelter power cable
(1) from pwer distribution panel (2).
2. Disconnect male end of electric welder 100
AMP power cable (3) from pwer distribution panel
( 2 ).
3. Unscrew lock ring (4) on AUX SERVICE
ENTRANCE receptacle (5) on shelter power entry
panel (6) and remove cable connector (7) from recep-
tacle.
4. Replace dust cap (8).
5. Clean cable (3) and store in shop.
2-40
