TM 1-4920-434-13&P
0025 00
NOTE
Welding splatter may be removed by grinding with a portable disc grinder
without removing welding table top.
REMOVE
1. Remove four counter sunk screws, lock washers, flat washers, and nuts attaching welding table top to
welding table.
2. Store hardware in cotton mailing bag.
INSTALL
1. Place new welding table top onto welding table and align hole in welding table top with holes in welding table.
2. Remove hardware from cotton mailing bag and insert counter sunk screws into holes. Attach flat washer, lock
washer, and nut to screws.
3. Torque nuts 50-70 in. lbs.
End of Work Package
0025 00-18
