TM 1-4920-434-13&P
0025 00
MACHINE/WELDING SHOP
ENGINE LATHE BRACKETS
INITIAL SETUP
Tools And Special Tools:
References:
Tool Kit, Power Plant
MIL-STD-2219
Tool Kit, Electrical Repairer
Torque Wrench 0-600 in. lbs. (5120-01-530-2311)
Equipment Conditions:
Welding Machine (3431-01-507-1712)
Functional
Spoolmatic (3431-01-024-1681)
Control (3431-01-429-9607)
Regulating Flow Meter (4820-01-086-4310)
Argon Bottle (8120-00-282-8077)
Materials/Parts:
Front Lathe Bracket
(WP 0033 00, Figure 10, Item 1)
Hexagon Head Cap Screw
(WP 0033 00, Figure 10, Item 2)
Lock Washers (WP 0033 00, Figure 10, Item 3)
Flat Washers (WP 0033 00, Figure 10, Item 4)
Lathe Bracket (WP 0033 00, Figure 10, Item 5)
Upper Lathe Bracket
(WP 0033 00, Figure 10, Item 6)
Plain Hex Nut (WP 0033 00, Figure 10, Item 7)
Plug (WP 0033 00, Figure 10, Item 8)
Personnel Required: (1)
44E, Machinist
CMF 15 Series
NOTE
During installation of components the same hardware should be used so as to
maintain the original integrity of the shop sets.
INSPECT
Visually inspect Engine Lathe brackets for looseness or damage. If a bracket is loose, follow procedures in WP
0026 00. If a bracket is damaged, replace it with a new one or repair it if there is a cracked or broken weld. A
drawing for manufacturing a new bracket will be found in WP 0027 00.
0025 00-12
