TM 1-4920-434-13&P
MACHINE/WELDING SHOP
WATER/OIL SEPARATOR
INITIAL SETUP
Tools And Special Tools:
References:
Tool Kit, Power Plant
Equipment Conditions:
Utility Knife (5110-00-293-1585)
Functional
Materials/Parts:
Hexagon Head Cap Screw
(WP 0033 00, Figure 5, Item 1)
Lock Washer (WP 0033 00, Figure 5, Item 2)
Flat Washer (WP 0033 00, Figure 5, Item 3)
Pipe Bushing (WP 0033 00, Figure 5, Item 4)
Pipe Nipple (WP 0033 00, Figure 5, Item 5)
Pipe Coupling (WP 0033 00, Figure 5, Item 6)
Pipe Elbow (WP 0033 00, Figure 5, Item 7)
Non-Metallic Hose (WP 0033 00, Figure 5, Item 9)
Loop Clamp (WP 0033 00, Figure 5, Item 10)
Personnel Required: (1)
CMF 15 Series
WARNING
Make sure compressed air supply is disconnected before attempting any work on
water/oil separator. Do not direct compressed air near eyes or directly against
skin. Wear goggles; high pressure air against eyes can cause BLINDNESS.
NOTE
During installation of components the same hardware should be used so as to
maintain the original integrity of the shop sets.
0023 00-1
