TRICHLOROETHYLENE WILL HAVE TOXIC EFFECTS
U N L E S S PROPER VENTILATION IS PROVIDED,
OR IF ALLOWED TO HAVE PROLONGED CONTACT
WITH THE SKIN.
c. Never use this regulator for gases other than those for
which it has been designed and specified.
d. To clean the cylinder valve outlet, blow-out any foreign
matter by rapidly opening and closing the cylinder valve.
2.2 TO CONNECT THE REGULATOR
a. Observe the precautions listed in the previous paragraph.
b. Select the flow adapter best suited for your specific needs
from Table II. It is recommended that a series of adapters be
kept on hand so that all job requirements can be met. Flow
c. Apply a small amount of pipe compound onto the threads
of the flow adapter, screw the adapter into the regulator outlet,
and wrench-tighten. Use the mixture sparingly and apply it to
the male threads only; take care to prevent the mixture from
flowing past the end of the first thread.
Figure 3. Flow Adapter Markings