Flow Adapters can also be used with an 8010281 station valve
The pipeline must have a pressure of
for pipeline service.
30 psi.
Figure 2 illustrates the
method of
connection the
Flow Adapters
to a pipeline. Use an 8010267 plug and chain assembly to cap-
off unused outlets.
Figure 2. Flow Adapter for Pipeline Service
Section II. I N S T A L L A T I O N
2.1 PRECAUTIONS
a. These regulators must not be used where rated capacity
will be exceeded. The regulator will not maintain the required
dellvery pressure under this condition.
b. Be sure that all connections to the regulator are clean.
To remove dirt or grease on the regulator and surrounding
metallic parts, wipe or brush with trichlorethylene.