586-12 for instructions regarding installation of filters
10-11.
Reassembly
and gaskets.
Reassemble the external fuel filter assembly by
reversing disassembly procedure. Refer to TM 56115-
Section V. ELECTRICAL CABLE ACCESSORY COMPONENTS
10-12.
General
b.
Refer to TM 5-6115-586-12
and
test
a.
The electrical cable accessory components
individual wires for continuity.
are the 400 Hz electrical power output cable
assembly, the 60 Hz electrical power output cable
c.
Replace the cable assembly if inspection
assembly, the 400 Hz remote power cable assembly,
and / or testing reveals damage or lack of continuity in
DC electrical power standby cable assembly, external
individual wires.
DC electrical power input cable assembly, external
battery DC power cable assembly.
10-16.
DC Electrical Power Standby Cable
b.
Refer to TM 5-6115-586-12 for a description
Assembly
of use of the cable assemblies, illustrations, and wire
a.
Visually inspect the cable assembly for
run charts.
damaged connectors or connector covers, sleeves, or
cables.
c.
This section contains inspection, testing,
and replacement instructions for the cable assemblies.
b.
Refer to TM 5-6115-586-12
and
test
individual wires for continuity.
10-13.
400 Hz Electrical Power Output Cable
c.
Replace the cable assembly if inspection
Assembly
and /or testing reveals damage or lack of continuity in
a.
Visually inspect the cable assembly for
individual wires.
damaged connectors or connector covers, sleeves, or
cables.
10-17.
External DC Electrical Power Input Cable
b.
Refer to TM 5-6115-586-12
and
test
Assembly
individual wires for continuity.
a.
Visually inspect the cable assembly for
damaged connectors or connector covers, sleeves, or
c.
Replace the cable assembly if inspection
cables.
and/ or testing reveals damage or lack of continuity in
individual wires.
b.
Refer to TM 5-6115-586-12
and
test
individual wires for continuity.
10-14.
60 Hz Electrical Power Output Cable
c.
Replace the cable assembly if inspection
Assembly
and /or testing reveals damage or lack of continuity in
a.
Visually inspect the cable assembly for
individual wires.
damaged connectors or connector covers, sleeves, or
cables.
10-18.
External Battery DC Power Cable
b.
Refer to TM 5-6115-586-12
and
test
Assembly
individual wires for continuity.
a.
Visually inspect cable assembly for
damaged connector, lugs, adapters, or cable.
c.
Replace the cable assembly if inspection
and / or testing reveals damage or lack of continuity in
b.
Test continuity of the two wires.
individual wires.
c.
Replace the cable assembly if inspection
10-15.
400 Hz Remote Power. Cable Assembly
and / or testing reveals damage or lack of continuity in
individual wires.
a.
Visually inspect the cable assembly for dam
aged connectors or connector covers, sleeves, or
cables.
Section VI. CONDITIONED AIR SYSTEM ACCESSORY COMPONENTS
Visually inspect the two clamps (fig. 10-6) and
10-19.
Coupling Assembly
the flanged coupling for damage and check that
a. Inspection.
the clamps operate satisfactorily.
10-9
