Figure 5-20. Compressor and exhaust fans wire harness assembly.
(1) Disconnect wire lead assemblies to
b. Disassembly.
After inspection and testing,
terminal board TB7.
disassemble the wire harness only as required for repair
or replacement.
(2) Remove cable clamp.
c. Cleaning and Inspection.
(3) Remove lockwire, disconnect connectors
P43, P45, P47, P53, P54, and P55 and remove the wire
(1) Clean wire harness with a clean, lint-free
harness.
cloth moistened with an approved solvent and dry
thoroughly.
5-27
