TM 5-3431-201-10
Rpm (revolutions per...........1,400
Voltage:
minute).
Max ....................................28
Code No. ...........................SPL480
Min .....................................18
Amperage:
(4) Welding machine.
Start ...................................11
Manufacturer ......................Libby Welding Co., Inc.
Run ....................................1
Model .................................ODW-300
b. Tabulated Data.
Rpm ...................................1,400 under load
Kw (kilowatt) rating .............3
(1) Engine.
Voltage ..............................115 v dc
Manufacturer ......................Detroit
Diesel
Engine
Mounting ............................Skid mounted
Division, General Motors
(5) Storage batteries.
Corporation
Manufacturer ......................Willard Storage Battery Co.
Model .................................2056
Type ...................................6TN
Type ...................................Diesel (2-cycle)
Rating ................................12 v
Number of cylinders ...........2
Quantity .............................2
Bore ...................................4.250 in. (inches)
(6)
Capacities.
Stroke ................................5 in.
Compression ratio ..............17 to 1
Fuel tank, engine ...............15 gal (gallons)
Displacement .....................141.9 cu in. (cubic inches)
Fuel tank, heater ................2-1/2 qt (quarts)
Crankcase oil .....................9 qt
(2) Winterization heater.
Air cleaner ..........................1 qt
Manufacturer ......................South Wind Division of
Cooling system ..................13 qt
Stewart Warner Corporation
(7)
Adjustment data.
Model .................................939-C24
v-belts . ...............................5/8 in. deflection
Output ................................23,000 Btu (British thermal
(8) Dimensions and weight (fig. 1).
units)
Fuel ...................................Gasoline
Overall length ....................101 in.
Fuel consumption ...............0.26 gph (gallons per hour)
Overall width ......................28 in.
Current consumption ..........11 amp (amperes) starting;
Overall height ....................48-1/2 in.
1 amp running
Weight ...............................3,193 lb (pounds)
Operating voltage ...............28 v (volts), dc (direct
(9) Maintenance and operating supplies.
current) max (maximum);
Refer to table I for a complete list of
18 v dc min (minimum)
maintenance and operating supplies
Dimensions:
required for initial operation.
Length ................................9-1/2 in.
Width .................................6-3/4 in.
5. Difference in Models
Height ................................15-5/16 in.
This manual covers only the Libby Welding
Weight ...............................15 pounds (approximately)
Model ODW-300 welding Machine. No known unit
(3) Welder.
difference exists for the model covered by this manual.
Manufacturer ......................Lincoln Electric Co.
Type ...................................300
6
