TM 1-4920-455-13&P
b. Connecting Power to ECU.
1. Set ECU MODE SELECTOR switch (1) to
OFF position.
2. Remove cap (2) from receptacle (3).
3. Aline end of ECU cable connector (4) and
ECU power input receptacle (3). Push firmly until
seated.
4. Screw connector lock ring (5) on receptacle
(3).
d. Storing ECU Support Frames.
c. Repeat a and b above for remaining ECU.
1. Remove four ring bolts (1) from both ECU support frames (2). Move frames to expanded side wall.
2-17
