0011 00
TM 1-4920-445-13&P
CONNECTING POWER TO ECUS
NOTE
There are several ECU conigurations compatible for this shop set. Refer to the applicable ECU
Owner s Manual for operating, grounding, and maintenance instructions.
Figure 13.
Connecting Power to ECU s.
1.
Inspect installation of ECU (A) (Figure 13, Item 1) and power cable (Figure 13, Item 3).
2.
Position MODE switch (Figure 13, Item 2) to OFF position.
3.
Remove protective dust cap (Figure 13, Item 7) from power input receptacle (Figure 13, Item 6).
4.
Push end of connector (Figure 13, Item 5) into power input receptacle (Figure 13, Item 6) until seated.
5.
Screw connector lock ring (Figure 11, Item 4) on power input receptacle (Figure 11, Item 6).
6.
Repeat Steps 1 through 5 for ECU (B).
END OF WORK PACKAGE
0011 00-10