HIGH VOLTAGE exists in the electrical system of the shop. All
electrical inspections, repairs or replacement will be performed with
the power off and only by qualified electricians. Serious shock hazards
exist which could result in injury or death to personnel.
a. Power Off at Electric Welder.
1. Ensure electric welder is turned off.
2. Set special electric welder circuit breaker (1)
to the OFF position.
3. Loosen lock ring (2) on cable connector (3) and
remove connector (3) from outlet (4) located beneath
special circuit breaker (1).
4. Install protective cap (5) on outlet (4).