TM 1-4920-455-13&P
2-10. Positioning Shop Equipment for Transport. The following procedures, and recommended sequence, for
moving equipment from the operational mode to the transport or storage mode will be observed.
a. Removing Welding Exhaust Fan.
1. Ensure exhaust fan control switch is set to
OFF and Disconnect exhaust fan power supply cord.
2. Loosen and remove four bolts (1), lock-
wahsers (2), and washers (3) from brackets (4) secur-
ing welding exhaust duct assembly (5) to shelter wall.
Remove duct assembly and set aside.
3. Remove exhaust fan (6) from shelter wall and
store in overhead rack (7).
2-28