TM 1-4920-445-13&P
0055 00
INSTALLATION CONTINUED
WATER FEED-THRU CONNECTOR ASSEMBLY CONTINUED
Figure 6.
Attach Water Feed-Thru Connector Assembly.
3.
Install all but one screw (Figure 6, Item 2), have assistant install lat washers (Figure 6, Item 3), lock washers
(Figure 6, Item 4), and nuts (Figure 6, Item 5) inside of shelter and secure.
4.
Replace one lanyard (Figure 6, Item 6) on outside of shelter and install remaining screw (Figure 6, Item 2).
5.
Have assistant install lat washer (Figure 6, Item 3), lock washer (Figure 6, Item 4), second lanyard (Figure 6,
Item 6), and nut (Figure 6, Item 5) on inside of shelter.
6.
Tighten screws (Figure 6, Item 2).
0055 00-5