TM 1-4920-445-13&P
0018 00
POSITIONING WORK TABLE ASSEMBLY FOR OPERATIONAL MODE - CONTINUED
WARNING
A four man lift is required when moving or lifting the work table assembly. Trying to move or lift
the work table assembly without suficient help can cause SERIOUS INJURY to personnel.
1.
Remove two cargo straps (Figure 1, Item 1) from stacked work table assemblies (Figure 1, Item 2 and 6).
2.
Remove top work table assembly (Figure 1, Item 2) from bottom work table assembly (Figure 1, Item 6).
3.
Position top work table assembly (Figure 1, Item 2) at operational mode location.
4.
Remove four ring bolts (Figure 1, Item 5) from transport mode location.
5.
Remove four setscrews (WP 0070 00, Figure 2, Item 18 or 19) from shelter BII box and install into empty loor
inserts.
6.
Remove two cargo straps (Figure 1, Item 1) from work table assembly (Figure 1, Item 3) and shelf cabinet (E)
(Figure 1, Item 4).
7.
Remove work table assembly (Figure 1, Item 3) from shelf cabinet (E) (Figure 1, Item 4).
8.
Position work table assembly (Figure 1, Item 3) at operational mode location.
9.
Store cargo straps (Figure 1, Item 1) in secure storage location and ring bolts (Figure 1, Item 5) in shelter BII
box.
END OF WORK PACKAGE
0018 00-3/4 blank