Skip this Work Package if ECUs are not going to be installed.
ECUs are supplied by unit.
HINGED FLOOR CABLE GUIDE HOUSING REMOVAL
DO NOT attempt to remove cables if support cables are not secured. Removing cables
while under tension could cause SERIOUS INJURY or DEATH to personnel.
Before installing ECUs, shelter expansion must be complete (WP 0005 00), SUPPORT
CABLES MUST BE SECURED (WP 0005 00), and electrical power supplied to shop
Hinged Floor Cable Guide Housing Removal.
Remove three screws (Figure 1, Item 4) from hinged loor cable guide housing (Figure 1, Item 2) located at
corner of fold-out loor (Figure 1, Item 3).
Remove support cable (Figure 1, Item 1) from hinged loor cable guide housing (Figure 1, Item 2).
Support cable (Figure 1, Item 1) shall hang freely next to shelter.